Product Description
Manufacturer Part Number: CPF41LBS-P
For 3/8" or 1/2" (10 or 12 mm) Glass Works with 2-11/16" (68 mm) Pivot Setback Door Patch Fittings Left and Right Handed
The CRL Curved Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A">PH20A or PH21A">PH21A Top Door Patch Fitting. For single doors， the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also， a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205">AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a PH92">PH92 Ceiling Mounted Support Fin Bracket.
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
If the weight of the transom exceeds 100 lbs. (45.4 kgs) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings.
The CRL Curved Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A">PH20A or PH21A">PH21A Top Door Patch Fitting. For single doors， the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also， a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205">AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a PH92">PH92 Ceiling Mounted Support Fin Bracket.
| Catalog Number: | CPF41LBS |
| Color: | Brushed Stainless |
| Ship Via: | Can Ship UPS |
| Shipping Weight: | 2 lb (907g) |
| Minimum Order: | 1 Each |
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
If the weight of the transom exceeds 100 lbs. (45.4 kgs) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings.
Comment